保定市隔离墩模具厂

1.首先应做好使用前的准备工作 。 因模具的选材大部分选择塑料模具,所以比较有韧性。因此,在我们使用该模具之前,最好先用水将其浸泡。这样经过模具经过浸泡之后,它的韧性会增强,也会很快的适应当地相应的条件,增加模具的使用寿命。

1. first of all, we should do a good job of preparation before use. Because most of the material selection of the mold is plastic mold, so it is more flexible. So before we use the mold, it is best to soak it with water first. In this way, after the die is soaked, its toughness will be enhanced, and it will quickly adapt to the local conditions and increase the life of the mold.

2.注意使用过程中的保养环节 。 一般,这样的模具使用过程中的保养环节很容易被人忽略,这种做法是不正确的。在使用过程中,我们应注意:这样的模具应贮存于常温干燥库中,堆码高度不超过3.5m,避免重力挤压,不允许与有毒有害物质混放,远离热源。

2. pay attention to the maintenance process in the process of use. Generally, the maintenance link in the use of this mold is easy to be ignored, this practice is not correct. In the process of using, we should pay attention to: it should be stored in dry mold base, the stacking height of not more than 3.5m, to avoid the gravity extrusion, and does not allow toxic and harmful substances are mixed together, away from the heat source.