| 交通隔离墩模具成型工艺 |
| 添加时间：2018/3/21 14:45:29 浏览次数： |
| 交通隔离墩模具成型工艺。交通隔离墩模具的成型工艺是影响产品质量的重要因素，不同的原料因注塑设备的大小不同,温度以及压力大小同样会导致产品的柔韧度及变形度不同,严重的会导致产品变脆,尺寸不稳定,甚至出现开裂.因此选择时一定要选择正规厂家生产的产品。 Mold forming technology of traffic isolation pier. Traffic isolation pier die forming process is an important factor affecting the quality of products, different materials are different because of the size of injection molding equipment, temperature and pressure will also cause the product flexibility and different degree of deformation, a serious cause of products is brittle and unstable size, even cracking. So the choice must choose the regular manufacturers of products. 交通隔离墩模具的厚度也是影响产品质量的一个重要因素，一般长度50,高度12以上的模具厚度不能低于3mm,如果低于这个厚度,有可能导致混凝土砖成型时鼓包,脱模时出现困难,甚至脱不出来。 The thickness of the mould for the traffic isolation pier is also an important factor affecting the product quality. The thickness of the mold with a length of 50 or more than 12 can not be less than 3mm. If it is lower than this thickness, it may cause the concrete brick to bulge when molding, and it will be difficult to get rid of the mould, or even it will not come out. |
| 上一页 车行道隔离设施 |
| 下一页 隔离墩模具特点 |
Copyright © 技术支持：遨游网络