保定市隔离墩模具厂

高速隔离墩模具产品的外围必须要在适当的位置开排气槽,排气槽规格请参考模具设计手册。尽可能避免使用打磨机在高速隔离墩模具上打磨,如果非要用打磨机加工,必须用油石省光(特别是分型面)。内模胶位面的表面处理必须依照bom表,或者其它正式通知的技术要求执行。非胶位面上的加工纹路(线切割,铣床,cnc锣床,火花机)也要用油石省亮。所有内模材料,模胚等级要求必须依据订单,或者设计审核过程中正式确认的技术要求进行采购。必须提供材质证明,如果是硬模,必须提供热处理报告。

The periphery of the mould for high-speed isolation pier must be opened in the proper position, and the specifications of the exhaust tank should refer to the mold design manual. As far as possible, avoid using the grinding machine to polish on the mould of the high-speed isolation pier. If we do not need to use the grinding machine, we must use the oil stone (especially the parting surface). The surface treatment of the inner surface of the die must be carried out according to the technical requirements of the BOM form or other formal notification. Processing lines on non adhesive surfaces (wire cutting, milling machines, CNC Gong beds, spark machines) also need to be brightly lit. All internal mold materials and mold grading requirements must be purchased according to the order, or the technical requirements formally identified in the design process. Material proof must be provided. If it is a hard mold, heat treatment report must be provided.