| 高速隔离墩钢模具的脱模效果 |
| 添加时间：2019/1/5 15:39:37 浏览次数： |
| 为了保证高速隔离墩钢模具的脱模效果，通常都会在模具里面均匀地涂上一层脱模剂，这样脱模的时候会更加迅速，而且能够保证水泥隔离墩的光滑度，我们按照客户提供的规格尺寸进行制作，而且还要问一下客户是否需要在隔离墩钢模具的侧面加一个翻转边的设计，这样能够让工人在操作的时候更加简单。高速隔离墩钢模具在日常生活当中应用是非常广泛的，它使用的是专业设备和先进技术，确定需要制作的钢模具的结构属性，使其整体更加稳定，使用隔离墩模具能够进行批量生产隔离墩预制块，再将预制块运输到施工的现场安装，我们在这个过程当中要注意运输的安全稳定，不能对隔离墩造成破坏。高速隔离墩钢模具使用钢面板的尺寸规整，厚度都是在3毫米以上，整个生产流程非常简单，大多都会安装在高速公路上使用，保证交通有秩序没有阻碍，能够改善高速快速发展引起的交通事故频发的状况。 In order to ensure the demoulding effect of steel mould for high-speed isolation pier, a layer of demoulding agent is usually coated uniformly in the mould, so that demoulding will be faster and the smoothness of cement isolation pier can be guaranteed. We make it according to the specifications and sizes provided by customers, and also ask whether customers need to add a turning edge on the side of the steel mould for isolation pier. This will make it easier for workers to operate. High-speed isolation pier steel die is widely used in daily life. It uses professional equipment and advanced technology to determine the structural properties of the steel die to make it more stable as a whole. Using isolation pier die can produce isolation pier prefabricated blocks in batches, and then transport prefabricated blocks to construction site installation. We should pay attention to transportation in this process. Safety and stability, can not cause damage to the isolation pier. High-speed isolation pier steel mold uses steel panel size regularity, thickness is more than 3 mm, the entire production process is very simple, most of them will be installed on the highway, to ensure that the traffic is orderly and unhindered, can improve the situation of frequent traffic accidents caused by rapid development. |
| 上一页 人行道隔离设施 |
| 下一页 未来高速隔离墩模具的发展该遵循的原则 |
Copyright © 技术支持：遨游网络